Table of Contents
Advertisement
2-3
Motherboard Installation
All motherboards have standard mounting holes to fit different types of chassis.
Make sure that the locations of all the mounting holes for both motherboard and
chassis match. Although a chassis may have both plastic and metal mounting fas-
teners, metal ones are highly recommended because they ground the motherboard
to the chassis. Make sure that the metal standoffs click in or are screwed in tightly.
Then use a screwdriver to secure the motherboard onto the motherboard tray.
Tools Needed
Philips Screwdriver
(1)
Location of Mounting Holes
Caution: 1) To avoid damaging the motherboard and its components, please do
not use a force greater than 8 lb/inch on each mounting screw during motherboard
installation. 2) Some components are very close to the mounting holes. Please take
precautionary measures to avoid damaging these components when installing the
motherboard to the chassis.
Philips Screws (8)
P2-JWD1
P1-JBR1
P2-JBR1
P1-JPME2
P1-JPME1
P2-JPME2
P1-JWD1
P2-JPME1
P2-BT1
P2-JBT1
CPU2
P1-BT1
P1-JBT1
CPU1
LEDM2
LEDM1
2-5
Chapter 2: Installation
Standoffs (8)
Only if Needed
J27
P2-JSD1
P2-SATA4
P1-SATA4
P1-JSD1
P1-JPG1
P2-JPG1
P1-JPB1
P2-JPB1
Advertisement
Table of Contents
