Table of Contents
Advertisement
Chapter 1: Introduction
1.3 System Features
The following table is an overview of the main features of the 1029U-TN10RT server.
System Features
Motherboard
X11DPU
Chassis
SC119UTQ10-R1K02-N10T
CPU
Dual Intel Xeon 82xx/62xx/52xx/42xx/32xx or 81xx/61xx/51xx/41xx/31xx processors (in Socket P (LGA3647))
(Intel Xeon Processor Scalable Family). For the latest CPU/memory updates, refer to our website at
http://www.supermicro.com/products/motherboard/Xeon/C620/X11DPU.cfm.
Memory
Twenty-four slots for up to 6TB of 3DS Load Reduced DIMM (3DS LRDIMM), 3DS Registered DIMM (3DS
RDIMM), or up to 3TB of Load Reduced DIMM (LRDIMM) with speeds of up to 2933 MHz; support for Non-
Volatile DIMM (NVDIMM) and Intel Optane DC Persistent Memory (DCPMM)
Chipset
Intel C621
Expansion Slots
Two full height, full width x16 PCI-E slots
Storage Drives
Ten hot-swap 2.5" bays for NVMe; four hybrid ports support SATA, or SAS with an optional add-on card
Two M.2 SSD cards (one NVMe and one SATA3) supported on the RSC-UMR-8 riser card
Power
Two 1000 W redundant 80Plus Titanium level modules
Cooling
Eight 4-cm counter-rotating fans, two CPU heatsinks, two air shrouds to direct air flow
Input/Output
Two SATA 3.0 ports with power-pin built-in, w/support of Supermicro SuperDOM (S-SATA4/S-SATA5)
LAN: Two 10 GBaseT; one dedicated IPMI port
USB 3.0: Two ports on the rear I/O panel (USB 0/1); two ports on the chassis front (USB 3/4)
One serial port; one VGA port
Form Factor
1U rackmount; (WxHxD) 17.2 x 1.7 x 27.8 in. (437 x 43 x 706 mm)
9
Advertisement
Table of Contents
