Supermicro SuperServer 1029U-TN10RT User Manual page 118

SuperServer 1029U-TN10RT User's Manual
TestName: FW
State: Ok
Message:
The firmware consistency and settings check succeeded.
Preferences
Use this submenu to display or modify user preferences.
View and/or modify user preferences.
Default DIMM ID:
Use this feature to modify the default display of DIMM identifiers. The options are Handle
and UID.
Capacity units:
This feature is to modify the default units for displaying capacities. Use auto (x1024) or
Auto_10 (x1000) to automatically select the best format. The options are Auto, Auto_10,
B, MB, MiB, GB, GiB, TB, and TiB .
App Direct settings:
This feature is to view or modify the interleaving settings for creating App Direct capacity.
The default setting is 4KB_4KB (Recommended).
App Direct granularity:
This feature is to or modify the minimum App Direct granularity per DIMM. The options are
Recommended and 1.
Driver Health
This submenu displays the health status of the drivers and controllers as detected by the
system. The following information is displayed.
Intel(R) DCPMM 1.0.0.3380 Driver Healthy
Intel(R) DCPMM Controller Healthy
Intel Persistent Memory DIMM 25 Controller Healthy
Intel Persistent Memory DIMM 33 Controller Healthy
Intel Persistent Memory DIMM 41 Controller Healthy
(Additional controllers are listed if detected.)
118