Table of Contents
Advertisement
VGA Priority
Use this item to select the graphics device to be used as the primary video display for system
boot. The options are Onboard and Offboard.
RSC-UMR-8 SLOT1 PCI-E x8 OPROM
RSC-UMR-8 M.2_PCIe OPROM
Select Disabled to deactivate the selected slot, Legacy to activate the slot in legacy mode,
and EFI to activate the slot in EFI mode. The options are Disabled, Legacy, and EFI.
Onboard LAN Option ROM Type
Select an option to enable Option ROM support to boot the computer using a device specified
by the user. The options are Legacy and EFI.
Onboard LAN1 Option ROM
Onboard LAN2 Option ROM
Use the above four items to select the type of device installed in a LAN port specified by the
user for system boot. The default setting for Onboard LAN1 Option ROM is PXE, and the
default setting for Onboard LAN2 Option ROM is Disabled.
Onboard NVMe1 Option ROM
Onboard NVMe2 Option ROM
Onboard NVMe3 Option ROM
Onboard NVMe4 Option ROM
Use the above four items to select the type of the device installed on an NVMe port specified
by the user for system boot. The options are Disabled, Legacy, and EFI.
AOC-URN6-i2XT NVMe3 OPROM / AOC-URN6-i2XT NVMe4 OPROM / AOC-URN6-i2XT
NVMe5 OPROM / AOC-URN6-i2XT NVMe6 OPROM / AOC-URN6-i2XT NVMe1 OPROM
/ AOC-URN6-i2XT NVMe2 OPROM
system)
Use the above four items to select the type of the device installed on an NVMe port specified
by the user for system boot. The options are Disabled, Legacy, and EFI.
Onboard Video Option ROM
Select Legacy to boot the system using a legacy video device installed on the motherboard.
The options are Disabled, Legacy, and EFI.
Network Stack Configuration
Network Stack
Select Enabled to enable UEFI (Unified Extensible Firmware Interface) for network stack
support. The options are Disabled and Enabled.
(Available when the device is detected by the
97
Chapter 6: BIOS
Advertisement
Table of Contents
