Supermicro Supero SUPERSERVER 6027TR-DTRF User Manual page 118

SUPERSERVER 6027TR-DTQRF/DTFRF/DTRF User's Manual
Port 0~5 Hot Plug
Select Enabled to enable hot-plug support for a particular port, which will allow the
user to change a hardware component or device without shutting down the system.
The options are Enabled and Disabled.
Staggered Spin Up
Select Enabled to enable Staggered Spin-up support to prevent excessive power
consumption caused by multiple HDDs spinning-up simultaneously. The options
are Enabled and Disabled.
RAID Mode
The following items are displayed when RAID Mode is selected:
PCH RAID CodeBase
Select Intel or LSI to specify the code base to be used for RAID support. The
options are Intel and LSI.
Port 0~5 Hot Plug
Select Enabled to enable hot-plug support for the particular port. The options
are Enabled and Disabled.
SCU (Storage Controller Unit) Confi guration
Storage Controller Unite
Select Enabled to support a PCH storage device. The options are Disabled and
Enabled.
Onchip SCU Option ROM
Select Enabled to support the onboard SCU Option ROM to boot up the system via
a SCU device. The options are Disabled and Enabled.
SCU Port 0~SCU Port 3: The AMI BIOS will automatically detect the presence of
a SCU port and display the status of this port as detected.
7-14