Table of Contents
Advertisement
H8SME-F SERVERBOARD USER'S MANUAL
2-8
Connector Defi nitions
IF + POWER
This edge connector, located on the
opposite end of the motherboard from
the I/O back panel, is used to connect
the motherboard to the back plane
of the server chassis. Through this
connector, the motherboard receives
its power and communicates with other
components installed in the system.
Unit Identifi er Button
There is a Unit Identifi er (UID) button
on the rear I/O of the board. When
you push the UID button, the Rear
UID indicator will illuminate. Push the
button again to turn off the indicator.
These UID indicator provides easy
identifi cation of a system unit that may
be in need of service.
KVM Port
The KVM port (JKVM1) supports
keyboard, VGA and
UART interface. Please attach a
compatible KVM connector/switch to
this port.
Power Button & LED
A Power Button and LED is located
next to the KVM port. Push this button
to turn on the motherboard. When
the LED is on, the power of this
motherboard is turned on.
mouse via a
2-14
UID Button
Pin Defi nitions
Pin#
Defi nition
1
Ground
2
Ground
3
Button In
4
Ground
Advertisement
Table of Contents
