Pci Expansion Cards - Supermicro Supero H8SME-F User Manual

H8SME-F SERVERBOARD USER'S MANUAL
2-6

PCI Expansion Cards

A riser card is used to support one Micro-LP (low profi le) PCI-E 2.0 x8 expansion
card.
Installing a MicroLP Expansion Card
1. Power-down the node using that node's individual power button and remove it
from the system.
2. Open the PCI slot clip and remove the PCI slot shield.
3. Open the PCI slot clip in the rear of the motherboard node.
4. Remove the PCI slot shield.
5. Insert the expansion card into the riser card.
6. Slide the expansion cards' bracket into the PCI card slot and fi t it with the
opening in the rear of the node.
7. Close the PCI card slot clip to secure the expansion card.
8. Secure the add-on card by closing the PCI slot shield lever.
9. Connect cables to the add-on card as necessary.
2-12