Dell PowerEdge FC830 Owner's Manual page 8

Figure 5. iDRAC Direct LED indicator
1. iDRAC Direct status indicator
The iDRAC Direct LED indicator table describes iDRAC Direct activity when configuring iDRAC Direct by using the management
port (USB XML Import).
Table 4. iDRAC Direct LED indicator
Convention iDRAC Direct LED
indicator
A Green
B Flashing green
C Green and turns off
D Not lit
The iDRAC Direct LED indicator table describes iDRAC Direct activity when configuring iDRAC Direct by using your laptop and
cable (Laptop Connect):
Table 5. iDRAC Direct LED indicator
iDRAC Direct LED
indicator
Solid green for two
seconds
Flashing green (on for
two seconds and off for
two seconds)
Turns off
Locating Service Tag of your system
Your system is identified by a unique Express Service Code and Service Tag number. The Express Service Code and Service Tag
are found on the front of the system by pulling out the information tag. Alternatively, the information may be on a sticker on the
chassis of the system. This information is used by Dell to route support calls to the appropriate personnel.
8 Dell PowerEdge FC830 system overview
Condition
Turns green for a minimum of two seconds to indicate the start and end of a file
transfer.
Indicates file transfer or any operation tasks.
Indicates that the file transfer is complete.
Indicates that the USB is ready to be removed or that a task is complete.
Condition
Indicates that the laptop is connected.
Indicates that the laptop connected is recognized.
Indicates that the laptop is unplugged.