Chapter 13
13 2 1
Configure the RADVD Address Type
1
Visit http://tplinkmodem.net, and log in with the password you set for the modem
router.
2
Go to
Advanced
3
Select
IPv6
to configure IPv6 LAN parameters.
1 ) Select the
RADVD
prefixes to hosts.
Note:
Do not select the
you may not be able to access the IPv6 network. For more information about RDNSS and ULA Prefix,
contact our technical support.
2 ) Keep
Site Prefix Type
specific IPv6 site prefix, select
3 ) Keep
Prefix Delegated WAN Connection
4
Click
Save
to make the settings effective.
13 2 2
Configure the DHCPv6 Server Address Type
1
Visit http://tplinkmodem.net, and log in with the password you set for the modem
router.
2
Go to
Advanced
3
Select
IPv6
to configure IPv6 LAN parameters.
>
Network
>
LAN
Settings.
address type to make the modem router assign IPv6 address
Enable RDNSS
and
Enable ULA Prefix
as the default value Delegated. If your ISP has provided a
Static
>
Network
>
LAN
Settings.
Specify Your Network Settings
check boxes unless required by your ISP. Otherwise
and enter the prefix.
as the default value.
88