Vehicles With Factory Rear-View Camera - Car-Interface c.LOGiC lite CI-C1-CCC Manual

3. Connections
Obey the direction
arrows of the optical
connectors!
NEW!
Remote signal and rear-view camera input + functions
4pin Molex connector
2pin AMP connector
3.1.

Vehicles with factory rear-view camera

Transfer video-signal and video-signal ground pins from
vehicle connector to the 2pin AMP connector of the
fibre optical interface box harness.
Navi Connector
CCC white 12pin Quadlock
CIC white 12pin Quadlock
E65 green 18pin AMP
Interface black 2pin AMP
Version 20.09.2017
pink – remote signal +12V, high when navigation is on
grey – connect to ground to activate 2-pin camera-input
green – camera power +12V (max 0.5A)
grey – camera video signal
black – camera video ground
Video-signal
Pin 4
Pin 2
Pin 3
Pin 1
Video-signal ground
Pin 2
Pin 12
Pin 11
Pin 2
CI-C1-CXC-TV1