Table of Contents
Advertisement
Quick Links
c.LOGiC Interface
CI-C2-MK-AUX
Compatible with BMW Professional navigation
systems
without iDrive (MK2-MK4)
Product features
• Full plug and play multimedia interface
• 2 AV-inputs with separate IR-control channels
• control of after-market devices, e.g. DVB-T tuner, DVD-player, DVD-changer, ...
• after-market rear-view camera input (optional adapter is necessary)
• automatic switching to after-market rear-view camera input
• rear-view camera power (+12V max. 1A)
• Rear-seat-entertainment video-output for Video-sources connected to the c.LOGiC
• power-on remote-out trigger-signal (+12V max. 1A) to switch on connected devices
• video-in-motion
Version 20.09.2017
CI-C2-MK-AUX
Advertisement
Table of Contents
Related Manuals for Car-Interface CI-C2-MK-AUX
Summary of Contents for Car-Interface CI-C2-MK-AUX
- Page 1 Interface CI-C2-MK-AUX Compatible with BMW Professional navigation systems without iDrive (MK2-MK4) Product features • Full plug and play multimedia interface • 2 AV-inputs with separate IR-control channels • control of after-market devices, e.g. DVB-T tuner, DVD-player, DVD-changer, … • after-market rear-view camera input (optional adapter is necessary) •...
-
Page 2: Table Of Contents
DIP switch settings 4. Operation 4.1. Activation of the video-in-motion function 4.2. Selecting the c.LOGiC as current AV-source 4.3. Switching to AV1 and AV2 4.4. Picture settings 4.5. Button assignment table 5. Specifications Appendix A – Device control table Version 20.09.2017 CI-C2-MK-AUX... -
Page 3: Prior To Installation
Take down the SW-version and HW-version of the interface boxes, and store this manual for support purposes. Harness C3C-BM700 Interface-box C2C-M700 HW_____ SW_____ If remote function for a peripheral device shall be used, additional an IR- Remote cable and Y-adapter are needed, see chapter AV-source(s) . Version 20.09.2017 CI-C2-MK-AUX... -
Page 4: Check Compatibility Of Vehicle And Accessories
Navigation system Professional without iDrive (MK2-MK4) Limitations Factory-audio-AUX-input The factory audio-AUX-input is used for audio-insertion by the c.LOGiC. Alternative use of the AUX-input is only possible by additional switch-box integration. After-market rear-view Compatible with NTSC-cameras only. camera Version 20.09.2017 CI-C2-MK-AUX... -
Page 5: Connection Schema
2. Connection schema Version 20.09.2017 CI-C2-MK-AUX... -
Page 6: Installation
5series (E39) and 7series (E38) on the left hand side the radio module of the 7series is located behind lining in the car wing). The X5 (E53) radio module is located underneath the boot lining, next to the battery. The navigation computer is located on the left hand side behind the boot lining. Version 20.09.2017 CI-C2-MK-AUX... -
Page 7: Interconnecting Interface-Box And Harnesses
3.1. Interconnecting interface-box and harnesses Plug harness C3C-BM700 into 14pin of interface-box C2C-M700. Plug female 18pin AMP connector of C3C-BM700 into male 18pin AMP connector of interface-box C2C-M700. Version 20.09.2017 CI-C2-MK-AUX... -
Page 8: Connections To The Navigation Computer Or - If Existing - To The Tv-Tuner
Plug blue female 18pin AMP connector of harness C3C-BM700 into blue male 18pin AMP connector of navigation computer or of the factory TV-tuner (if existing and not removed). Note: If an existing factory TV-tuner will be removed the optionally available harness CAB- BMW200 is necessary! Version 20.09.2017 CI-C2-MK-AUX... -
Page 9: Connections To Radio Module
Radiomodul Push the black plastic cap onto the female 12pin connector and insert it into the female Quadlock connector. Reconnect the female Quadlock connector to the radio module. Vehicle female 12pin connector Version 20.09.2017 CI-C2-MK-AUX... -
Page 10: Connecting Peripheral Devices
The c.LOGiC interface has the possibility to connect and remotely control by navigation buttons up to 2 pre-programmed devices. The device list in the device control table shows the pre-programmed remote channels and the related IR-remote cables STA-xxx which must be ordered separately for the control of the device. Version 20.09.2017 CI-C2-MK-AUX... -
Page 11: Installing Av-Source's Ir-Sensor Additionally
R-CAM IN of interface-box C2C-M700. Connect the green wire of C3C-BM700 to the camera power supply (+12V max. 1A) The green wire is high (+12V) when reverse gear is engaged. Note: Compatible with NTSC cameras only. Version 20.09.2017 CI-C2-MK-AUX... -
Page 12: After-Market Rear-Seat-Entertainment
Press 3x the “MENU“ key to access the “VI SETTINGS“ menu of the c.LOGiC. Use the right knob to make changes within the “VI SETTINGS“ menu. Press 1x the “MENU“ key to exit the “VI SETTINGS“ menu. Version 20.09.2017 CI-C2-MK-AUX... -
Page 13: Audio Settings
Note: After the reverse gear is disengaged, the monitor stays on camera video until the vehicle reaches a speed of 10 km/h. To leave the camera video press the right knob. Version 20.09.2017 CI-C2-MK-AUX... -
Page 14: Dip Switch Settings
LED should turn off. If the status LED should not turn off, open the C2C-M700 housing, set the DIP switch “3” to OFF and connect the open white/black wire from C3C-M700 harness with ignition (+12V). 1+2+3 =OFF (special case) Version 20.09.2017 CI-C2-MK-AUX... -
Page 15: Operation
"1 <> 4" , "2 <> 5" , "3 <> 6" can be used for picture settings. (each with short keypress). You can deactivate the picture setting mode Contrast in the “VI SETTINGS“ or by turning off ignition. Colour saturation Brightness Version 20.09.2017 CI-C2-MK-AUX... -
Page 16: Button Assignment Table
The function description equals the remote control buttons of the device’s remote control. On the additional device the writing may vary (e.g. AV instead of Source). Version 20.09.2017 CI-C2-MK-AUX... - Page 17 TRACK - TRACK - CH - 10 long DISC CH + TRACK + TRACK + TRACK + TRACK + CH + 11 long DISC TITLE TITLE 12 long SUBTITLE SUBTITLE INFO DISPLAY DISPLAY 13 long DTV/RADIO AUDIO AUDIO Version 20.09.2017 CI-C2-MK-AUX...
-
Page 18: Specifications
-30°C to +80°C Weight 202g Measurements (box only) B x H x T 90 x 30 x 105 mm Legal disclaimer: Mentioned company and trademarks, as well as product names/codes are registered trademarks ® of their corresponding legal owners. Version 20.09.2017 CI-C2-MK-AUX...
Need help?
Do you have a question about the CI-C2-MK-AUX and is the answer not in the manual?
Questions and answers