Zcv39 / Zcv42 51Uhs Box / Component Locations - Kingsman marquis BENTLEY ZCV39LPE2 Installation Instructions Manual

ZCV39 / ZCV42
Included with base model.
The 51-UHS is designed for millivolt and IPI units for in-unit installation of the Remote Receiver, Fan Control Module, and the IPI
Module. 51-UHS can be inserted & removed from beneath fireplace through access panel opening (Remove glass door first).
NOTE: When using a remote control, the 51-UHS must be used. Batteries for Remote Receiver can be changed by lifting 51-UHS up
through opening.
Fan Control Module
51-UHS can be inserted & removed from beneath fireplace through access panel opening (Remove glass door first).
COMPONENT LOCATIONS
NOTE: The gas line
connection may be made of
1/2" rigid pipe or an
Approved Kingsman Flex
Connector, such as
FP15GC. Since some
municipalities have
additional local codes, it is
always best to consult your
local authorities and the
current CAN/CGA - B149.1
or .2 installation code in
Canada or the National
Fuel Gas code ANSI
Z223.1 in the U.S.A
Power Vent Control Module
51UHS Box
IPI Module
Remote Receiver
(See Each Section For Connections & Wiring)
Gas line
Access Panel
Batteries
ULK Transformer
Valve
51-UHS Box
Fan
UHS Box
36