Easy-Irf - H3C S6520-SI Series Command Reference Manual

Field
MAD status
Member ID
MAD IP address
Neighbor
MAD status

easy-irf

Use easy-irf to bulk-configure basic IRF settings for an IRF member device.
Syntax
easy-irf [ member member-id [ renumber new-member-id ] domain domain-id
[ priority priority ] [ irf-port1 interface-list1 ] [ irf-port2
interface-list2 ] ]
Views
System view
Predefined user roles
network-admin
Parameters
member member-id : Specifies the member ID of a member device. The value range for the
member ID is 1 to 10.
renumber new-member-id : Specifies a new member ID for the device. The value range for the
member ID is 1 to 10. The member device automatically reboots for the new member ID to take
effect. If you do not specify this option, the command does not change the member ID.
domain domain-id : Specifies an IRF domain ID in the range of 0 to 4294967295. Assign the
same domain ID to all devices you are adding to the same IRF fabric.
priority priority : Specifies an IRF priority in the range of 1 to 32. The greater the priority
value, the higher the priority. A member with higher priority is more likely to be the master.
irf-port1
interface-list1 argument represents a space-separated list of up to four interface items. Each
interface item specifies one interface in the interface-type interface-number form.
irf-port2 interface-list2 : Specifies interfaces bound to IRF-port 2. A physical interface
can be bound to only one IRF port. The interface-list2 argument represents a
space-separated list of up to four interface items. Each interface item specifies one interface in the
interface-type interface-number form.
Usage guidelines
This command bulk-configures basic IRF settings for a member device, including the member ID,
domain ID, priority, and IRF port bindings.
The easy IRF feature provides the following configuration methods:
Description
BFD MAD operating status:
•
Normal—BFD MAD is operating correctly.
•
Faulty—BFD MAD is not operating correctly. Check the BFD MAD link
connectivity.
•
N/A—BFD MAD link status cannot be detected. If BFD MAD is enabled
on a management Ethernet port, it is normal that this field displays N/A.
BFD MAD details:
•
Member ID—IRF member ID of the local device.
•
MAD IP address—MAD IP address of a member device.
•
Neighbor—IRF member ID of the neighboring member device.
•
MAD status—BFD MAD link state. Options include Normal and Faulty.
interface-list1 : Specifies interfaces
8
bound to IRF-port 1. The