Approved Antennas - Meru Networks AP822v2 Installation Manual

5

Approved Antennas

Only approved antennas may be used in conjunction with AP822eV2 access points. Access
Points have been designed to operate with the antennas listed below. Antennas not included
in this list are strictly prohibited for use with these devices. The required antenna impedance
is 50 ohms.
S.No
1
2
3
4
5
6
7
8
9
10
11
12
Meru Part Number
ANT-01ABGN-0304-0
ANT-01ABGN-0406-O
ANT-ABGN23O-W
ANT-I2ABGN-0304-O
ANT-O4ABGN-0607-PT
ANT-O4ABGN-0606-O
ANT-ABGN-23
ANT-6ABGN-24
ANT-ABGN47O
ANT-O6ABGN-0606-O
ANT-I3ABGN-0304-O
ANT-O6ABGN-0607-PT
Description
Omni Directional Rubber Duck
antenna
High Gain Omni Directional Rubber
Duck antenna
Omni Directional Rubber Duck
antenna
Ceiling mount Omni Directional
Antennna
Dual Band Wall Mount Patch 4-lead
Antenna
Outdoor Omni Directional 4-leads
Dual Band Antenna
Dual Band Ceiling mount Omni Direc-
tional 3-lead Antenna
Dual Band Ceiling mount Omni Direc-
tional 6-lead Antenna
Dual Band High Gain Dipole Omni
Directional Antenna
Dual Band Omni Directional 6-lead
Antenna
Dual Band Ceiling mount Omni Direc-
tional 3-lead Antenna
Dual Band Wall Mount Patch 6-lead
Antenna
Gain (2.4GHz/
5.0GHz)
3/4 dBi
4/6 dBi
2/3 dBi
3/4 dBi
6/7 dBi
6/6 dBi
3/4 dBi
2.5/4 dBi
4.7/4.7 dBi
6/6 dBi
3/4 dBi
6/7 dBi
41