Table of Contents
Advertisement
Figure 2:
Power Options
A power source is needed to power the AP822iV2 and XP8i. The AP requires either IEEE Std
802.3af or IEEE Std 802.3at compatible external Power-over-Ethernet (PoE) switch or PoE
injector. If PoE power source is not available, 12-V DC power (2A rated) must be supplied.
When connected to an IEEE Std 802.3af PoE power source, both USB and the secondary Ethernet
port (G2) shall be disabled due to power limitations.
AP822iV2 and XP8i is intended to be supplied by a UL listed power supply marked Class 2 or LPS and
rated 12Vdc, 2A. If an optional power supply is used, it must be one supplied by Meru Networks.
20
AP822 Kensington lock
Before You Begin
Advertisement
Table of Contents
Need help?
Do you have a question about the AP822v2 and is the answer not in the manual?
Questions and answers