Table of Contents
Advertisement
4.
Position the AP with the adapter plate installed, up to the T-Bar with the "MNT-SCRMKIT-
04" installed, at an angle. Be sure that the locating pin on the "MNT-SCRMKIT-04" is posi-
tioned in the indent on the adapter. Depress slightly to disengage T-Bar locks.
5.
Twist the AP clockwise to engage T-Bar locks. There should be 2 audible clicks.
6.
Verify that the AP comes online.
AP Installation over Interlude & Silhouette T-Bars
33
Advertisement
Table of Contents
