Table of Contents
Advertisement
LD-G-8
Acceleration and brake delay
It is possible to program the acceleration and brake delay individually
via the central unit.
Emergency stop
By setting a CV-variable it is possible to adjust how an emergency stop
is carried out. There are the following possibilities:
§
no emergency stop possible,
§
emergency stop at change of direction and / or
§
emergency stop by operating of F1.
Function outputs
The decoder has four function outputs which can be switched on and
off via the function keys „function" and / or the auxiliary function keys
F0 to F8. They are available to connect optional accessories (e.g.
lighting, smoke generator, sound module, electric coupling).
You can assign the function keys to the function outputs freely. It is
possible to assign several function keys to one function output.
Effects of the function outputs
It is possible to set the following effects for all function outputs
individually:
§
Irregular flickering. Example of use: Flickering of the boiler fire by
steam engines.
§
Strobe (flashing). Example of use: American locomotives with that
kind of lighting.
§
MARS light (swelling of the brightness). Example of use: American
locomotives with that kind of lighting.
§
Switching on and off depending on the direction of travel.
§
Flashing with a frequency of 2 Hz with two phases which are out-
of-phase by 180 degrees. Example of use: individual flash lights or
alternating flash lights.
§
Flashing with a frequency of 1 Hz.
English
Page 33
Advertisement
Table of Contents
