Command Reference Tables; Addressing Commands - Digi XBee-PRO User Manual

Command reference tables

Addressing commands

AT
Command Name and Description
DH Destination Address High.Set/Get the upper 32 bits of
the 64-bit destination address. When combined with DL,
it defines the 64-bit destination address for data
transmission. Special definitions for DH and DL include
0x000000000000FFFF (broadcast) and
0x0000000000000000 (coordinator).
DL Destination Address Low. Set/Get the lower 32 bits of
the 64-bit destination address. When combined with DH,
it defines the 64-bit destination address for data
transmissions. Special definitions for DH and DL include
0x000000000000FFFF (broadcast) and
0x0000000000000000 (coordinator).
MY 16-bit Network Address. Read the 16-bit network
address of the module. A value of 0xFFFE means the
module has not joined a ZigBee network
MP 16-bit Parent Network Address. Read the 16-bit
network address of the module's parent. A value of
0xFFFE means the module does not have a parent.
NC Number of Remaining Children. Read the number of
end device children that can join the device. If NC returns
0, then the device cannot allow any more end device
children to join.
SH Serial Number High. Read the high 32 bits of the
module's unique 64-bit address.
SL Serial Number Low. Read the low 32 bits of the
module's unique 64-bit address.
XBee/XBee-PRO ZigBee RF Modules User Guide
Parameter Range
0 - 0xFFFFFFFF
0 - 0xFFFFFFFF
0 - 0xFFFE
[read-only]
0 - 0xFFFE
[read-only]
0 - MAX_CHILDREN
(maximum varies)
0 - 0xFFFFFFFF
[read-only]
0 - 0xFFFFFFFF
[read-only]
Default
0
0xFFFF(Coordinato
r)
0 (Router/End
Device)
0xFFFE
0xFFFE
read-only
factory-set
factory-set
188