Lcd Menu And Setting - Datavideo SE-900 Instruction Manual

System configuration
Press on the SETTING button for system configuration, turn the ADJUST Knob to select
an item and press down on the Knob to confirm the setting.

LCD Menu and Setting

1. CHROMA-KEY
Supports Green-Key, Blue-Key and Luma-key
Press on the ADJUST button to pop up the menu
as shown below, turn the ADJUST button and
select item 1 for Chroma-Key setting. There are two
pages of parameters (items 1-19) for Chroma Key
setting
CHROMA KEY NO.
1 CAM SOURCE
2 BKG SOURCE
3 KEY MODE
4 GREEN/BLUE Offset
5 LEVEL
6 DENSITY
7 DARK
8 BRIGHTNESS
9 SPILL
10 DARK DENSITY
11 TRANSPARENT LUMA
NEXT PAGE
Chroma-Key adjustments:
- Select Chroma-key No.: To access the stored parameter
There are 4 sets (1~4) of memory to store different setting of Chroma-key
parameters, turn the knob to select a number of parameter set
- CAM. Source: Select the Foreground video input
There are 8 video inputs channel on SE-900, select any one of the 8 input as
Chroma-Key foreground. SE-900 supports simultaneous switching of foreground
and background video. Input CH1-4 is recommended as foreground input video.
1~ 4
1~ 8
1~ 8
GREEN, BLUE LUMA
-60~ +60
0~ 100
0~ 64
0~ 64
0~ 64
-32~ 64
0~ 64
0~ 100
16
1 CHROMA KEY
2 VIDEO IN
3 VIDEO OUT
4 LOGO (LUMA KEY)
5 CG INPUT
6 AUDIO DELAY
7 MULTI. IMAGE
8 EXT. GENLOCK
9 SYSTEM
10 CONTROLLER
11 STORE & RECALL
12 UPDATE FIRMWARE
ESCAPE