Heinner MG1600TA-UV Manual page 20

www.heinner.com
7. Put the plastic juice tray through the sleeve and make it on the suitable position.(fig.7)
8. Insert the plastic screw into the hole of the sleeve, then move it clockwise until it is
properly fastened. Then place the plastic cover onto the sleeve.(fig.8)
Now the appliance is ready for juicing.
XI. HOW TO CLEAN YOUR APPLIANCES
Meat left behind in the cutter housing may be removed
from the inside of the appliance by passing a slice of
bread through the cutter housing.
1. Before you clean the appliance, switch the
appliance off and remove the plug from the
socket.(fig.12)
2. Press the release button and turn the whole cutter
housing in the direction of the arrow. Remove the
pusher and the tray.(fig.13)
3. Unscrew the screw ring and remove all parts of the
cutter housing. Do not clean the parts in the
dishwasher!
4. Wash all parts that have come into contact with
meat in hot soapy water. Clean them immediately
after use.
5. Rinse them with clear hot water and dry them
immediately.
6. We advise you to lubricate the cutter unit and the
grinding discs with some vegetable oil.
1600W, 50/60Hz, 220-240V
19