Download
Share
Print this page
Texas Instruments TUSB422 EVM Quick Start Manual
  1. Manuals
  2. Brands
  3. Texas Instruments Manuals
  4. Controller
  5. TUSB422 EVM
  6. Quick start manual
Texas Instruments TUSB422 EVM Quick Start Manual

Texas Instruments TUSB422 EVM Quick Start Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
This document describes how to use the TUSB422EVM.
1
TUSB422 BoosterPack™ EVM
..........................................................................................................................
2
Power
3
DIP Switch Setting
4
Header Settings
5
Quick Start Guide
5.1
External I
5.2
MSP43x LaunchPAD Operation
1
TUSB422 EVM
2
MSP430 LaunchPAD With TUSB422 BoosterPack
3
Serial Port Setup
1
Default Switch Configuration Settings
2
Headers With SHUNT Configuration Options
3
Other Headers and Test Loops
1
TUSB422 BoosterPack™ EVM
The TUSB422 BoosterPack™ EVM is designed to evaluate the TUSB422 device. The EVM can operate
stand-alone or with an MSP43x LaunchPAD™. The board can be powered via an external DC 20-V input
or USB Type-C™ VBUS, depending on the power switch selection. If the board is to operate standalone,
DIP switches are provided to enable the power switches on the board for USB Type-C VBUS or VCONN
source and sink operations. It is important that all DIP switches remain in the OFF position if the board is
to operate with a MSP43x LaunchPAD or external controller that controls the power switches on the
board.
BoosterPack, LaunchPAD are trademarks of Texas Instruments.
USB Type-C is a trademark of USB Implementers Forum, Inc..
All other trademarks are the property of their respective owners.
SLLU252 – September 2016
Submit Documentation Feedback
TUSB422 EVM Quick Start Guide
............................................................................................
...........................................................................................................
..............................................................................................................
............................................................................................................
.................................................................................
2
C Controller Operation
..................................................................................
...............................................................................................................
.............................................................................................................
....................................................................................
............................................................................................
Copyright © 2016, Texas Instruments Incorporated
Contents
List of Figures
.....................................................................
List of Tables
............................................................................
User's Guide
SLLU252 – September 2016
TUSB422 EVM Quick Start Guide
1
2
2
3
4
4
4
2
4
5
2
3
3
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the TUSB422 EVM and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Texas Instruments TUSB422 EVM

Summary of Contents for Texas Instruments TUSB422 EVM

  • Page 1 MSP43x LaunchPAD or external controller that controls the power switches on the board. BoosterPack, LaunchPAD are trademarks of Texas Instruments. USB Type-C is a trademark of USB Implementers Forum, Inc.. All other trademarks are the property of their respective owners.

  • Page 2: Dip Switch Setting

    SW1.7 5V_VBUS_EN Enables or disables 5-V VBUS source SW1.8 HV_VBUS_EN Enables or disables high voltage VBUS source (9 V or 15 V) TUSB422 EVM Quick Start Guide SLLU252 – September 2016 Submit Documentation Feedback Copyright © 2016, Texas Instruments Incorporated...

  • Page 3: Header Settings

    When the EVM and TUSB422 is in VBUS SINK operation, VBUS output can be measured via LP7. LP1 and LP8 GND probe and debug purposes. Do not connect to power source. SLLU252 – September 2016 TUSB422 EVM Quick Start Guide Submit Documentation Feedback Copyright © 2016, Texas Instruments Incorporated...
  • Page 4 Figure Figure 2. MSP430 LaunchPAD With TUSB422 BoosterPack 3. On the TUSB422 EVM, ensure all DIP switches on SW1 are in the OFF position and all SHUNTs are positioned in default configuration, unless other operations are desired. 4. Power on the MSP43x LaunchPAD, first via the micro-AB USB receptacle on the LaunchPAD.
  • Page 5 UART terminal. Select “Port” based upon the COM port number of the UART terminal connection. Figure 3. Serial Port Setup SLLU252 – September 2016 TUSB422 EVM Quick Start Guide Submit Documentation Feedback Copyright © 2016, Texas Instruments Incorporated...
  • Page 6 STANDARD TERMS AND CONDITIONS FOR EVALUATION MODULES Delivery: TI delivers TI evaluation boards, kits, or modules, including any accompanying demonstration software, components, or documentation (collectively, an “EVM” or “EVMs”) to the User (“User”) in accordance with the terms and conditions set forth herein. Acceptance of the EVM is expressly subject to the following terms and conditions.
  • Page 7 FCC Interference Statement for Class B EVM devices NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
  • Page 8 【無線電波を送信する製品の開発キットをお使いになる際の注意事項】 開発キットの中には技術基準適合証明を受けて いないものがあります。 技術適合証明を受けていないもののご使用に際しては、電波法遵守のため、以下のいずれかの 措置を取っていただく必要がありますのでご注意ください。 1. 電波法施行規則第6条第1項第1号に基づく平成18年3月28日総務省告示第173号で定められた電波暗室等の試験設備でご使用 いただく。 2. 実験局の免許を取得後ご使用いただく。 3. 技術基準適合証明を取得後ご使用いただく。 なお、本製品は、上記の「ご使用にあたっての注意」を譲渡先、移転先に通知しない限り、譲渡、移転できないものとします。 上記を遵守頂けない場合は、電波法の罰則が適用される可能性があることをご留意ください。 日本テキサス・イ ンスツルメンツ株式会社 東京都新宿区西新宿６丁目２４番１号 西新宿三井ビル 3.3.3 Notice for EVMs for Power Line Communication: Please see http://www.tij.co.jp/lsds/ti_ja/general/eStore/notice_02.page 電力線搬送波通信についての開発キットをお使いになる際の注意事項については、次のところをご覧くださ い。http://www.tij.co.jp/lsds/ti_ja/general/eStore/notice_02.page SPACER EVM Use Restrictions and Warnings: 4.1 EVMS ARE NOT FOR USE IN FUNCTIONAL SAFETY AND/OR SAFETY CRITICAL EVALUATIONS, INCLUDING BUT NOT LIMITED TO EVALUATIONS OF LIFE SUPPORT APPLICATIONS.
  • Page 9 Notwithstanding the foregoing, any judgment may be enforced in any United States or foreign court, and TI may seek injunctive relief in any United States or foreign court. Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2015, Texas Instruments Incorporated...

  • Page 10: Important Notice

    IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue.