Connecting Component Input - NEC PX602WL User Manual

Connecting Component Input

15-pin - to - RCA (female) × 3 cable adapter
(ADP-CV1E)
Component video RCA × 3 cable (not sup-
plied)
Audio Equipment
• Select the source name for its appropriate input terminal after turning on the projector.
Input terminal
COMPUTER 1 IN
BNC
NOTE:
• When the signal format is set to [AUTO] (default factory setting when shipped), the computer signal and component signal are
automatically distinguished and switched. If the signals cannot be distinguished, select [COMPONENT] under [ADJUST] →
[VIDEO] → [SIGNAL TYPE] in the on-screen menu of the projector.
• To connect to a video device with a D terminal, use the sold separately D terminal converter adapter (model ADP-DT1E).
COMPUTER 1 IN
SOURCE button on the projector
cabinet
COMPUTER
BNC
6. Installation and Connections
BNC (male) - to - RCA (male) conversion
cable × 3 (sold commercially)
Blu-ray player
Button on the remote control
COMPUTER 1
COMPUTER 2
131