Table of Contents
Advertisement
3.Contact your system administrator and note the Server Address and Port with which you want to
register your phone.
4.Tap Menu.
5.Tap Setting ->Server Address to configure the server IP address and tap Port to configure the
server port.
Network Settings:
1. Swipe down from the top of the screen to enter the control center.
2. Tap Setting ->Advanced (default password: admin)->Network->WAN Port/VLAN
/Webserver Type/802.1x/VPN/LLDP/CDP/NAT to configure the network.
Afer successful registration the Home screen appears.
Using Your Extended Phone
Status Icons
The icons on the status bar of the touch screen give information about phone:
Icons
(White)
(Green)
(White)
(Green)
(Green)
(Red)
Volume Adjustment
Press during a call to adjust the receiver volume of the handset/speakerphone/headset.
Press when the phone is idle or ringing to adjust the ringer volume.
Press to adjust the media volume in the corresponding screen.
Description
Shows that camera is not detected.
Shows that Wi-Fi is turned on.
Shows that the phone is connected to wireless network successfully.
Shows that wired network is unavailable.
Shows that Bluetooth is turned on.
Shows that Bluetooth headset is paired successfully.
Shows that Bluetooth-Enabled mobile phone is paired successfully.
Shows that the phone is locked.
Shows that "Forward" is turned on.
Shows that "Do Not Disturb" is turned on.
Shows that "Auto Answer" is turned on.
Shows that you have missed calls.
Shows that you have unread voice mails.
Shows that "Silent" is turned on.
Shows that a USB flash drive is detected.
6
Advertisement
Table of Contents
