Snooze Mode; Backlight Mode; Adjustment Or Calibration - Ambient Weather WS11 User Manual

Wireless 8 channel advanced weather station with temperature spectrum color changing backlight
Table of Contents

Advertisement

In normal mode press and hold the HISTORY/- key for 3 seconds, and the maximum values will
begin flashing and the MAX CLR icon will be displayed. Press the SET key to clear the
maximum values. The maximum values will now display the current values.
Press the HISTORY/- key again (do not hold), and the minimum values will begin flashing and
the MIN CLR icon will be displayed. Press the SET key to clear the minimum values. The
minimum values will now display the current values.
Pres the ALARM key to exit the min/max checking and cleaning mode, return to normal display
mode.

5.7 Snooze Mode

If the alarm sounds, and you wish to silence the alarm, press the
backlight will turn. The alarm icon will continue to flash and the alarm will silence for five
minute. Press any key (HISTORY/+ ,SET, ALARM,CHANNEL/+) to permanently exit the
Snooze mode.

5.8 Backlight Mode

IF the LED is off, press the LIGHT button once. The backlight will turn on for five seconds, and
if no operation is performed for three seconds, the backlight will turn off.
Press and hold the LIGHT key for two seconds, and the backlight will turn on permanently, and
display LED ON icon will be displayed for three seconds in the time field.
IF the LED is on, press and hold the LIGHT button once, and the LED will turn off.
Note: If the LED is on, press LIGHT key once to select the backlight contrast level between
1 and 8.
Note: If plugged into AC power, the time area will display
on. It is not recommended leaving the LED on for a long period of time when operating on
batteries only, or the batteries will run down quickly.

5.9 Adjustment or Calibration

Note: The calibrated value can only be adjusted on the console. The remote sensor(s) always
displays the un-calibrated or measured value.
The measured humidity range is between 10 and 99%. Humidity cannot be accurately
Note:
measured outside of this range. Thus, the humidity cannot be calibrated below 10% or above 99%.
Version 1.0
©Copyright 2014, Ambient LLC. All Rights Reserved.
SNOOZE/LIGHT key, the
AC ON
and backlight will remain
14
Page

Advertisement

Table of Contents
loading

Table of Contents