Advertisement
Maintenance
CLEANING YOUR ALARM
YOUR ALARM SHOULD BE VACUUMED ONCE A MONTH
If the tamper resist feature has been activated you will need to
follow the instructions on Page 8 to remove your alarm for
maintenance.
To clean your alarm, remove it from the mounting bracket as
outlined in the beginning of this section. You can clean the
interior of your alarm (sensing chamber) by using compressed
air or a vacuum cleaner hose and blowing or vacuuming
through the openings around the perimeter of the alarm. The
outside of the alarm can be wiped with a damp cloth.
After cleaning, re-install your alarm and test your alarm by
using the test button. If cleaning does not restore the alarm to
normal operation the alarm should be replaced.
12
Advertisement
