Canon EOS 250D Advanced User's Manual page 50

Shutter Button
The shutter button has two steps. You can press the shutter button halfway.
Then you can further press the shutter button completely.
Preventing Camera Shake
Hand-held camera movement during the moment of exposure is called
camera shake. It can cause blurred pictures. To prevent camera shake,
note the following:
Hold and steady the camera as shown on "Holding the Camera"
z
(= 49).
Press the shutter button halfway to autofocus, then slowly press the
z
shutter button completely.
If you press the shutter button completely without pressing it halfway first,
z
or if you press the shutter button halfway and then press it completely
immediately, the camera will take a moment before it takes the picture.
Even during menu display, image playback, or image recording, you can
z
immediately go back to shooting-ready state by pressing the shutter button
halfway.
Pressing Halfway
This activates autofocusing and the
automatic exposure system that sets the
shutter speed and aperture.
The exposure setting (shutter speed and
aperture) is displayed in the viewfinder.
While you press the shutter button halfway,
the LCD monitor will turn off (= 272).
Pressing Completely
This releases the shutter and takes the
picture.
50