Canon EOS 250D Advanced User's Manual page 377

Steps on the Camera (3)
[DWi-Fi on] Screen
The Wi-Fi connection to a computer is now complete.
Operate the camera using EOS Utility on the computer.
z
To reconnect via Wi-Fi, see "Reconnecting via Wi-Fi" (= 413).
z
If the Wi-Fi connection is terminated while recording a movie with remote
z
shooting, the following will occur.
- If the power switch is set to <k>, movie shooting will continue.
- If the power switch is set to <1>, movie shooting will stop.
Operations using the camera are not possible after you use EOS Utility to
z
switch from still photo shooting mode to movie recording mode.
With a Wi-Fi connection to EOS Utility established, certain functions are
z
unavailable.
In remote shooting, the AF speed may become slower.
z
Depending on the communication status, image display or shutter release
z
timing may be delayed.
In Remote Live View shooting, the rate of image transmission is slower
z
compared to a connection via an interface cable. Therefore, moving subjects
cannot be displayed smoothly.
10
Establish a Wi-Fi connection.
Select [OK].
z
Disconnect,exit
Terminates the Wi-Fi connection.
z
Confirm set.
You can check the settings.
z
Error details
When a Wi-Fi connection error occurs,
z
you can check the details of the error.
377