Shooting with the Touch Shutter
Just by tapping on the LCD monitor screen, you can focus and take the
picture automatically.
Even if you set the drive mode to <i>, the camera will still shoot in the
z
single shooting mode.
Even if [AF operation] is set to [Servo AF], tapping on the screen will focus
z
on the image with [One-Shot AF].
Tapping on the screen in magnified view will not focus or take the picture.
z
If the Fish-eye effect Creative filter is set, the camera will focus using the AF
z
point at the center of the screen regardless of the point you tap on.
If the Miniature effect Creative filter is set, the Touch Shutter does not work.
z
1
Enable the Touch Shutter.
Tap [y].
z
Each time you tap on the icon, it will
toggle between [y] and [x].
[x] (Touch Shutter: Enable)
z
The camera will focus on the spot you
tap on, then the picture will be taken.
[y] (Touch Shutter: Disable)
z
You can tap on a spot to perform
focusing on the spot (Touch AF). Press
the shutter button completely to take the
picture.
2
Tap on the screen to shoot.
Tap on the face or subject on the
z
screen.
On the point you tap, the camera will
B
focus (Touch AF) with the AF method
that was set (= 197).
When focus is achieved, the AF point
B
turns green and the picture is taken
automatically.
If focus is not achieved, the AF point
z
turns orange and the picture cannot be
taken. Tap on the face or subject on the
screen again.
208