Auto Correction Of Brightness And Contrast - Canon EOS 250D Advanced User's Manual

Auto Correction of Brightness and
Contrast
If the image comes out dark or the contrast is low, the brightness and
contrast can be corrected automatically. This function is called Auto Lighting
Optimizer. The default setting is [Standard]. With JPEG images, the
correction is applied when the image is captured.
In Basic Zone modes, [Standard] is set automatically.
If [z: Highlight tone priority] is set to [Enable] or [Enhanced], [Auto
z
Lighting Optimizer] will be set automatically to [Disable].
If a setting other than [Disable] is set and you use exposure compensation
z
or flash exposure compensation to darken the exposure, the image may still
come out bright. If you want a darker exposure, set this function to [Disable].
Depending on the shooting conditions, noise may increase.
z
With [High], maximum burst may be lower, and image recording to the card
z
may take longer.
In step 2, if you press the <B> button and remove the checkmark [X] for
z
[Disable during man expo] setting, the Auto Lighting Optimizer can also be
set in the <a> mode.
1
Select [Auto Lighting Optimizer].
Under the [z] tab, select [Auto
z
Lighting Optimizer], then press
<0>.
2
Select the setting.
Select the desired setting, then press
z
<0>.
3
Take the picture.
The image will be recorded with the
z
brightness and contrast corrected as
necessary.
136
N