Setting A Room On Hold - Samsung HOTEL DCS User Manual

Hotel User Guide

SETTING A ROOM ON HOLD

An occupied room can be put on hold if it is required that no further
automatic charges are made to this room. For example, a guest may
request a checkout later than the programmed checkout time and
does not wish to be charged for an extra day.
N : To use the HOTEL key for setting a room on hold, see section 3,
OTE
HOTEL Key.
PROCEDURE
1. Press the
2. Enter the room number. Display shows:
3. Select
HOLD
crease the room bill at the programmed checkout time.
4. Press the
(Check Out) key. Display shows:
CHOUT
Enter Room
NUMBER:
Check Out Room
YES
. The status flag is set to 'on hold' and will not in-
key to exit the procedure.
SPEAKER
HOLD PRINT
Basic Administration
Using the
27