Edid Setting - Vanco Evolution EVSW4K41 Manual

The Extended Display Identification Data (EDID) is used by the source device to match its video resolution
with the connected display. The DIP switch on the front panel can be used to set the EDID to a fixed value to
ensure the compatibility in video resolution. The switch represents "0" when in the lower (OFF) position, and it
represents "1" while putting the switch in the upper (ON) position.
Note: The EDID DIP switch only used for setting the EDID of HDMI source device, and the USB-C source device
will automatically gains the EDID of display device.
Switch Status
0000
0001
0010
0011
0100
0101
0110
0111
1000
1001
1010
Switch Status
1011
1100
1101
1110
1111
•
Stereo: LPCM 2CH.
•
High Definition Audio: LPCM 8Ch, AC-3 6Ch, DTS 5.1, Dolby Digital5.1, DTS-HD7.1, Dolby TrueHD 7.1
•
Deep Color: 8bit, 10bit, 12bit

EDID SETTING

Video Resolution
1280x720@60Hz
1920x1080@60Hz DVI
1920x1080@60Hz 8bit
1920x1080@60Hz 8bit
1920x1200@60Hz 8bit
3840x2160@30Hz 8bit
3840x2160@30Hz 8bit
3840x2160@30Hz 8bit HDR
3840x2160@60Hz Deep Color
3840x2160@60Hz Deep Color HDR
EDID
User-defined EDID 1
User-defined EDID 2
User-defined EDID 3
User-defined EDID 4
User-defined EDID 5
800.626.6445
Audio Format
EDID Pass-through
Stereo
Stereo
High Definition
Stereo
Stereo
High Definition
Stereo
Stereo
High Definition
NOTE
The five user-defined EDID can be uploaded by
sending RS232 command "#UPLOAD_USER_
EDID [PARAM]", please refer to the chapter
6.2.4 Function Setting for more details.
15