Dynamic Mounting DOWN AND OUT Installation And Assembly Manual page 3

PACKAGE CONTENTS (continued)
• DOWN AND OUT MOUNT
• Hangers (x2)
ers preordained.)
• White paintable plastic wall covers (x2)
BAG 1
• 3/8in by 3 in. long lag-screws with washers (x4)
• Adhesive rubber-bumpers (x2)
• Zip ties (x4)
BAG 2
Fasteners for mounting the television to the Hangers, including:
• M6 x 20 mm (.78in) long Phillips head machine screw (x4)
• M6 x 35 mm (1.38in) long Phillips head machine screw (x4)
• M8 x 20 mm (.78in) long Phillips head machine screw (x4)
• M8 x 35 mm (1.38in) long Phillips head machine screw (x4)
• 1/4 tall plastic spacers; (4x) 1/8 in. tall plastic spacers (x8)
• Steel M6 washers (x4)
REQUIRED TOOLS AND EQUIPMENT
• 7/16 and 1/2 in. box or open ended wrenches
• 9/16 in. box wrench. (A ratcheting socket wrench with
extension is recommended.)
• 1/4 in. drill bit
• Power drill
• Tape measure
• Stud finder
• Level
• Phillips screwdrivers
Note: You will require assistance with lifting heavy parts
and equipment.
(With #10, 7/8 in. machine screws and wash-
Down and Out Mount, installation and assembly.
www.DynamicMounting.com
BAG 1.
BAG 2.
3