netvox RA02C User Manual
  1. Manuals
  2. Brands
  3. netvox Manuals
  4. Accessories
  5. RA02C
  6. User manual

netvox RA02C User Manual

Etherdevice switch
Hide thumbs Also See for RA02C:
Table of Contents

Advertisement

Quick Links

Download this manual
RA02C
Model：
Wireless-CO/Temperature Sensor
Wireless CO/Temperature Sensor
RA02C
User Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RA02C and is the answer not in the manual?

Questions and answers

Related Manuals for netvox RA02C

Summary of Contents for netvox RA02C

  • Page 1 RA02C Model： Wireless-CO/Temperature Sensor Wireless CO/Temperature Sensor RA02C User Manual...

  • Page 2: Table Of Contents

    T able of Content 1. Statement...................................2 2. Appearance................................2 3. Introduction................................3 4. Main Features................................3 5. Setting Instruction..............................4 5.1 Power on / Turn on / Turn off...........................4 5.2 Join Into Lora Network............................ 4 5.3 Function Key..............................5 5.4 Data Report...............................5 6.

  • Page 3: Statement

    In no event will Netvox be liable for any loss of data or income or any special, incidental, consequential or indirect damages, regardless of the cause of the loss.

  • Page 4: Introduction

    3. Introduction RA02C is a CO / temperature detector for Netvox Class-A devices based on the LoRaWAN open protocol and is compatible with the LoRaWAN protocol. LoRa Wireless Technology: LoRa is a wireless communication technology dedicated to long distance and low power consumption.

  • Page 5: Join Into Lora Network

    Power off while the device is on: Unload the batteries and wait till the capacitor is discharged (10 seconds); insert the batteries back to the device. At this time, the device is at turned on mode by default (has been turned on and there is no need to press any key to turn on the device).

  • Page 6: Data Report

    5.4 Data Report After the device is powered on, a version package and an attribute report data are sent immediately. Before any configuration is done, the device defaults to send data: Maximum time: 3600s Minimum time: 3600s (Detect current voltage value every 3600 seconds by default) Default reportchange: Battery - 0x01 (0.1V) Remarks: The real configuration depends on individual order requirement.
  • Page 7 Example#1 based on MinTime = 15 Minutes, MaxTime= 1 Hour, battery voltage Reportable Change = 0.1V MaxTime leeping(MinTime) sleeping sleeping sleeping Wakes up REPORT Wakes up and Wakes up and Wakes up and collects data Wakes up and 100mV collects data collects data REPORTS3.6 collects data...

  • Page 8: Restore To Factory Setting

    Min Interval for the following single programming is subject to real order. 8. Low Voltage Alarming The operating voltage threshold is 2.4V. If the voltage is lower than 2.4 V, RA02C will send a low-power report to the Lora network.

  • Page 9: Installation

    9. Installation This product does not have a waterproof function. After the network joining is completed, please place it indoors. This product is not suitable for places where there is a large amount of dust and water mist; it is not suitable for places where steam and oil mist may be generated; it is not suitable for places where smoke is normally retained.

Table of Contents