Introduction RA0701_R72601_RA0701Y is a ClassA type device based on the LoRaWAN protocol. The RA0701_R72601_RA0701Y data can be sent to the corresponding gateway via externally connecting the CO detector. LoRa Wireless Technology: LoRa is a wireless communication technology dedicated to long distance and low power consumption.
Appearance Figure2 R72601 Figure 1 RA0701 CO Sensor and host in the mask. Host and external CO Sensor Solar power supply. (subject to the actual object) (subject to the actual object) Figure 3 RA0701Y Host and CO sensor in the mask.
3. Main Features Compatible with LoRaWAN RA0701 / RA0701Y: DC 12V Adapter Power Supply R72601: Solar and rechargeable lithium battery powered Easy set up and installation 4.Set up Instruction 4.1 Join Into Lora Network RA0701_R72601_RA0701Y can communicate with the gateway. RA0701_R72601_RA0701Y needs to be added to the gateway network first.
4.4 Supported Frequency The currently supported network bands are: AS923, US915_HYBRID, EU868, AU915, CN470 and KR920. 4.5 Data Report After the device is powered on, the network will send a version package immediately, and then send the data report after about 45 seconds. The default report configuration of the device is as follows: ReportMaxTime: RA0701_ RA0701Y : 180 seconds, R72601: 900 seconds (subject to factory...
2. Re-start RA0701_R72601_RA0701Y to re-join to the network. 6. Installation 1. The RA0701 product does not have a waterproof function. After the network adding configuration is completed, please place it properly. The sensor should be placed in a sheltered environment from the wind and rain, and the wall should be perpendicular to the ground at 90 degrees.
Page 8
(5) R726X has a battery compartment inside, users can buy and install rechargeable 18650 lithium battery, a total of 3 sections, a single rechargeable lithium battery voltage 3.7V, capacity recommended 5000mah, the installation of rechargeable lithium battery steps are as follows: 1: Remove the four battery box screws and install three rechargeable lithium batteries.
shake. (2) Loosen the M5 nut at the bottom of the 727 matte and take the matte together with the screw. (3) Insert the power DC plug from the center through hole of the RA0701Y bottom cover, insert it into the RA0701Y DC socket, and then return the mating screw to the original position and lock the N5 nut tight.