ATEN CL5716I User Manual page 197

A description of the items is given in the table, below:
Item
New search
Search last results
Search excluding last
results
Server List
Priority
Start Date
Start Time
End Date
This is one of three radio buttons that define the scope of the
search. If it is selected, the search is performed on all the
events in the database for the selected unit.
This is a secondary search performed on the events that
resulted from the previous search.
This is a secondary search performed on all the events in the
database for the selected unit excluding the events that
resulted from the previous search.
KVM over IP switches are listed according to their IP address.
Select the unit that you want to perform the search on from this
list. You can select more than one unit for the search. If no
units are selected, the search is performed on all of them.
Sets the level for how detailed the search results display
should be. Least is the most general; Most is the most specific.
Least results appear in black; Less results appear in blue;
Most results appear in red.
Select the date that you want the search to start from. The
format follows the YYYY/MM/DD convention, as follows:
2009/11/04
Select the time that you want the search to start from. The
format follows the HH:MM:SS convention.
Select the date that you want the search to end at.
Chapter 15. The Log Server
Description
181