ATEN CL5716I User Manual page 55

Setting
RESTORE This function is used to undo all changes and return the setup to
DEFAULT the original factory default settings (see OSD FACTORY DEFAULT
VALUES SETTINGS, page 233) except for the port name list, username and
password information, which are saved.
CLEAR THE This function clears the port name list.
NAME LIST
ACTIVATE Choices are Y (on), or N (off). When activated, the beeper sounds
BEEPER whenever a port is changed; when activating the Auto Scan
function (see F7 SCAN, page 43); or an invalid entry is made on an
OSD menu. The default is Y.
SET QUICK This function lets the administrator select which ports to include as
VIEW PORTS quick view ports.
The default has no ports selected for quick view.
RESET STATION If you change the position of one of the stations in the daisy chain,
IDS the OSD settings will no longer correspond to the new location.
This function directs the OSD to rescan the station positions of the
entire installation and updates the OSD so that the OSD station
information corresponds to the new physical layout.
Note: Only the station numbers get updated. Except for the port
names, all administrator settings (such as SET ACCESSIBLE
PORTS, SET QUICK VIEW PORTS, etc.) must be input again for
all of the computers affected by the change.
SET This function allows the administrator to define the operating
OPERATING system for the computer connected to each KVM port. The default
SYSTEM is WIN (PC compatible).
To set the port operating system:
1. From the list, select the port for which you wish to set the com-
2. Set the operating system by pressing [Spacebar] to cycle
3. Press [Esc] to exit. The operating system you selected is
To select/deselect a port as a quick view port, double-click the
port, or use the navigation keys to move the highlight bar to it,
then press [Spacebar].
When a port has been selected as a quick view port, an icon dis-
plays in the QV column of the LIST on the main screen.
If one of the quick view options is chosen for the LIST view (see
F2 LIST, page 35), only a port that has been selected here
will display on the list.
If one of the quick view options is chosen for auto-scanning
(see SCAN/SKIP MODE, page 37), only a port that has been
selected here will be auto-scanned.
puter's operating system.
through WIN, MAC, SUN, or OTHER .
assigned to the KVM port.
Chapter 4. OSD Operation
Function
39