ATEN CL5716I User Manual page 226

CL5708I / CL5716I User Manual
Problem
The display on the client
computer is distorted and
performing an Autosync doesn't
resolve the problem.
The Lock Key LEDs on the
Control Panel don't accurately
reflect the actual locked status of
my keyboard input.
When I log in, the browser
generates a CA Root certificate
is not trusted, or a Certificate
Error response.
In multiuser operation I had
exclusive (or occupy) rights on
the port I was viewing. After I
recalled the Port Access page
and then came back to the port I
was occupying, it had been
taken over by another user. Why
did this happen?
210
Resolution
Switch ports to a port with a different resolution, then
switch back.
If the above didn't resolve the problem, change the
resolution and refresh rate for the system running on
the port. Afterward, you can either run at the new
resolution, or switch back to the original resolution.
When you first connect, the LED display may not
accurately reflect the LEDs on your keyboard. To
resolve the problem, click the LEDs on the Control
Panel until they match your keyboard. Afterward,
when you change them from the keyboard they will
change on the Control Panel.
The certificate's name is not found on Microsoft's list
of Trusted Authorities. The certificate can be
trusted. See Trusted Certificates, page 227, for
details.
If you try to return to the port by selecting again in
the tree, the switch acts as if you are accessing the
port for the first time. If another user was waiting on
the port, he takes precedence and gets the port.
The correct way to return to the port is to click the
Close icon at the top right of the Port Access page.