Operating Mode - ATEN CL5716I User Manual

CL5708I / CL5716I User Manual
General
The General section of the Device Information page displays the name of the
selected device, its firmware version and information about its network
configuration.
Note: The AP GUI version presents the same information as the Browser
version. Scroll through the list to see the additional entries.

Operating Mode

The Operating Mode page is used to set working parameters, as described
below:
If Force all to grayscale is enabled, the remote displays of all devices
connected to the KVM over IP switch are changed to grayscale. This can
speed up I/O transfer in low bandwidth situations.
If Enable Client AP Device List is enabled, the switch appears in the
Server List when using the WinClient or Java Client AP (see Windows
Client AP Login, page 57, and Java Client AP Login, page 61). If this
option is not enabled, the switch can still be connected to, but its name will
not appear in the Server List.
The Console Keyboard Language setting lets you specify which keyboard
mapping is being used by the Local Console keyboard. Drop down the list
to make your choice.
132