Setting Up The Sewing Machine; Installing The Thread Stand - JUKI DSC-245 Instruction Manual

1.SETTING UP THE SEWING MACHINE

Machine setting hole
ミシン止め穴（４ヶ）
(4ea.)
❹

2.INSTALLING THE THREAD STAND

Knee lifter supporting hole (4 ea.) ひざ上げ支え止め穴（４ヶ）
Hole
鎖穴
❶
❹
❷
❸
– 2 –
1. Mounting position of the knee lifter
(Caution)
The knee lifter should be mounted before the motor is
installed.
2. Carry the sewing machine with two persons.
(Caution) Do not hold the handwheel.
3. Do not put protruding articles such as the screw-
driver and the like at the location where the sewing
machine is placed.
4. Setting the sewing machine
Holding countersunk screw ❶ , washer ❷ and nut
❸ supplied with the unit, fix the sewing machine on
the table with aligned with rubber packing ❹ at four
locations.
5. Securely attach head support rod to the table until it
goes no further.
1. Assemble the thread stand,and insert it in the hole
in the machine table,and fix it by tightening nut ❶ .