Height Of The Feed Dog (Dsc-245,-4,-7) - JUKI DSC-245 Instruction Manual

15.HEIGHT OF THE FEED DOG (DSC-245,-4,-7)

WARNING :
Turn OFF the power before starting the work so as to prevent accidents caused by abrupt start of the
sewing machine.
Feed dog ❸ is factory-adjusted to jut out 0.8 mm from the surface of throat plate ❶ .How to adjust the height of
the feed dog.
1) Remove throat plate ❶ ,bed upper cover ❷ and spring support shaft ❹ to extract feed bar ❺ .
2) Remove pin ❻ .
3) Replace pin ❻ .
(Note）
Marker lines are marked. When making the height of the feed dog high,use the pin having more marker
lines,and when making the height low,use the pin having less marker lines.
– 8 –