Cleaning - Wilfa Xplode BLP-1200SI Operating Instructions Manual

P.
11
After using the blender
1. Disconnect the power from main supply.
2. Remove the lid (together with measuring cup) from the jar.
3. Remove the jar (together with blade assembly unit interface) from the
motor part.
Note: Always clean the removable parts immediately after use.
Note: It is recommended to cut the meat or other food into smaller pieces before
putting them in the jar. Do not operate with large quantities of food at one time.

CLEANING

Always clean the removable parts immediately after use.
Note: Be careful when cleaning the parts. Avoid touching the sharp blades!
1. Disconnect the power from main supply.
2. Disassemble all removable parts before cleaning.
3. Clean all removable parts in lukewarm water with dishwashing liquid.
4. Use dry cloth to clean the main body.