Grounding The Device - Planet IGS-6325-8T4X Quick Installation Manual

2. Tighten the wire-clamp screws for preventing the wires from loosening.
Figure 3-5: The pin of 6-contact terminal block connector
1. The wire gauge for the terminal block should be in the range
from 12 to 24 AWG.
2. Please check the wire AWG Ampere specification before
Note
connecting PLANET Industrial Managed Switch.

3.1 Grounding the Device

Users MUST complete grounding wired with the device; otherwise, a sudden
lightning could cause fatal damage to the device.
8
1 2 3 4
V+ V-
Power 1
DI 0 DI 1 DO 0 DO 1 GND GND
1 2 3 4 5 6
1 2 3 4 5 6
V1+ 1A@24V V2+
DC1 DC2
Input: 48-56V , 7.5A max.
Dual power input is required
for maximum PoE loading.
Refer to user's manual for
more details.
5 6
V+ V-
Power 2
Earth Ground