1. The wire gauge for the terminal block should be in the range
of 12 ~ 24 AWG.
2. Alarm relay circuit accepts up to 24V, max. 1A currents.
2.6 Grounding the Device
Users MUST complete grounding wired with the device; otherwise, a sudden
lightning could cause fatal damage to the device.
EMD (Lightning) DAMAGE IS NOT COVERED UNDER WARRANTY.
10
Max. Fault Alarm Loading: 24V, 1A
1 2 3 4 5 6
DC Input:
V1+
12-54V
, 7A max.
PWR1
Alarm
Earth Ground
V2+
PWR2