Recovering Back To Default Configuration - Planet IGS-6325-8T4X Quick Installation Manual

6. Recovering Back to Default Configuration
 IP address has been changed or admin password has been forgotten –
To reset the IP address to the default IP address "192.168.0.100" and the
user password to factory default mode (default password is admin), press the
hardware-based reset button on the front panel for about 10 seconds. After
the device is rebooted, you can log in the management Web interface within the
same subnet of 192.168.0.xx and default password. Be noted that all the previous
setups will be disappeared after the factory default reset is made.
Reset Button
802.3at PoE+
1
3
5
7
Figure 6-1: IGS-6325-16P4S Reset Button
Reset
1
3
5
Figure 6-2: IGS-6325-16T4S Reset Button
P1 P2 Fault
Ring R.O. I/O
2
4
Console
115200,N,8,1
Reset Button
Reset
6
17
8
P1 P2 Fault
Ring R.O. I/O
2
4
Console
6
17
17