GW Instek GCP-300 Instruction Manual page 12

3. Cleaning:
To clean the probe exterior, use a soft cloth dampened in a solution of mild
detergent and water. To clean the core, open the jaw and clean the exposed
core surfaces with a cotton swap dampened with isopropyl alcohol
(isopropanol). Lubricate the jaws mating surfaces with light oil.
Do not clean with solvents or abrasives. Do not immerse the probe.
4. Preparation for Shipment:
Our company has designed a special box to be used for GCP-300,
convenient for storage and shipment. Please do not discard it.
If the original packaging is unfit for use or not available, use the following
packaging guidelines:
(1) Use a sturdy shipping carton having inside dimensions at least one inch
greater than the probe dimensions.
(2) Put the probe into a plastic bag or wrap to protect it from dampness.
(3) Place the probe into the box and stabilize it with light packaging material.
(4) Seal the carton with shipping tape.
11