Table of Contents
Advertisement
o If the safety cut off has activated, the symbol "H" will appear in
the cooking zone indicator (3) that applies to the cooking zone
that has been left on. To reset the appliance, you should press
the ON/OFF button (1).
o If a cooking zone selection button (2) or the plus (5) or minus
(4) buttons are pressed, then the length of time before the
safety cut-out will activate is reset.
Automatic pre-heating
o This feature will set a cooking zone to maximum power and will
then automatically set the cooking zone to a power level that
you have selected after a certain period of time.
o Press the minus button (4) once and power level 9 will appear
on the cooking zone indicator (3), and then release the minus
button.
o Press the plus button (5) once and power level 9 appears on the
cooking zone indicator (3), alternating with the letter "A". Then
release the plus button.
o Finally you should select the actual power level that you want
the zone to automatically pre-heat to by using the minus button
(4).
o The cooking zone indicator (3) will alternate between showing
the actual power level and the symbol A.
o Once the automatic pre-heating time period is over, only the
actual power level will show on the cooking zone indicator (3).
LEVEL TIME LIMIT (hours)
1 – 2
3 – 4
5
6 – 9
o Select the cooking zone that you require by
pressing the corresponding cooking zone
selection button (2).
16
6
5
4
1.5
Advertisement
Table of Contents
