Epson WF-2810 Series User Manual page 122

User's Guide
2. Select Fax on the home screen.
To select an item, use the
3. Specify the recipient.
You can send the same monochrome fax to up to 100 recipients. However, a color fax can only be sent to one
recipient at a time.
❏ To enter manually: Press the fax number with the number buttons, and then press the OK button.
- To add a pause (pause for three seconds during dialing), press the
- If you have set an external access code in Line Type, enter "#" (hash) instead of the actual external access
code at the beginning of the fax number.
Note:
If you cannot manually enter a fax number, Direct Dialing Restrictions in Security Settings is set to On.
Select fax recipients from the contacts list or the sent fax history.
❏ To select from the contacts list: Press the
recipient you want to send to has not been registered in Contacts, register it from Contacts Manager.
Fax > Menu > Contacts Manager
❏ To select from sent fax history: Press the
Note:
To delete recipients you have entered, press the
button. Press the button to finish and return to the Fax screen.
4. Press the OK button, and then select Scan Settings or Fax Send Settings to make settings such as the
resolution and the sending method if necessary.
5. Press the button until you are returned to the Fax screen, and then press the
6. When sending is complete, remove the originals.
Note:
❏ If the fax number is busy or there is some problem, the printer automatically redials after one minute.
❏ To cancel sending, press the
❏ It takes longer to send a fax in color because the printer performs scanning and sending simultaneously. While the printer
is sending a fax in color, you cannot use the other features.
Faxing
u d l r
buttons, and then press the OK button.
u
button and select the recipients you want to send to. If the
d
button, and then select a recipient.
r
button on the Fax screen, select the recipient, and then press the OK
y
button.
d
button.
122
x
button to send the fax.