Motorola AP-0622 Installation Manual page 16

16
5. Attach an Ethernet cable from the access point to a controller with an 802.3af compatible power source or use
the PWRS-14000-148R power supply to supply power to the AP-0622 (once fully cabled).
6. Attach appropriate antennas to the connectors.
7. Attach an Ethernet cable from the access point to the controller with an 802.3af compatible power source.
8. Verify the unit has power by observing the LEDs.
CAUTION
!
1 - 0
D I O
R A
l e
n s o
C o
o E
1 / P
G E
1 2 V
D C
2 - 1
D I O
R A
If not using a 802.3af capable controller to power the AP-0622, ensure
only the AP-0622's designated power supply (PWRS-14000-148R) is
used to supply power to the access point. Using an incorrectly rated
power supply could damage the unit and void the product warranty.
Do not actually connect to the power source until the cabling portion
of the installation is complete.
AP-0622 Access Point
1 - 0
D I O
R A
l e
n s o
C o
o E
1 / P
G E
1 2 V
D C
2 - 1
D I O
R A