When you access the Setup page for the first time,
input "root" as the user name and "Projector" as
the password in the authentication dialog.
When you log in for the first time, the window that
prompts you to change the password is displayed.
Follow the instructions on the screen to change
the password.
The name of the administrator is preset to "root."
Entry area for
Entry area for [User]
[Administrator]
The password can be changed in the Password
page in the Setup page.
The password of the administrator and user
should be 8 to 16 characters that includes both
alphabet and numeric characters. Alphabet is
case-sensitive.
The default password "Projector" cannot be set as
a new password.
Note
If you forget your password, consult with qualified Sony
personnel.
The password will be reset with your permission.
Confirming the Settings for the Projector
You can confirm the current settings for the
projector on the Information page.
Operating the Projector from a Computer
You can control the projector from the computer
on the Control page.
The functions of the buttons shown in the
operation area are the same as those of the keys
on the supplied Remote Commander.
Using the e-mail Report Function
Set the e-mail report function on the Setup page.
Entered values will not be applied unless you click
on [Apply].
Notes
The e-mail report function is not available on the
network where Outbound Port25 Blocking is used and
cannot connect to the SMTP server.
You cannot enter the following characters in the text box:
" ' ", " " ", " \ ", " & ", " < ", " > "
37
Information area
Operation area