Table of Contents
Advertisement
3.3 Date, Time and Alarm
The Home screen displays the current day, date and time. If you have
enabled the alarm for the current day, the Home screen also displays an
Alarm icon right beside the time display.
The date and time are synchronized with Windows Vista® and cannot
be changed in SnapVUE mode. If you need to change the date and time
settings, you can do so in Windows Vista®.
Set the alarm
There are at most three alarms that you can enable. Each alarm can be
configured independently with different settings.
1.
Tap Settings on the Home screen, then tap Alarm.
2.
You will then see three Alarm tabs at the bottom. Tap the Alarm 1 tab.
3.
Select the Alarm 1 check box.
4.
Tap the day of the week for the alarm. You can select multiple days by
tapping each desired day.
5.
Tap the Up/Down arrow to set the time for the alarm, and choose
between AM and PM.
6.
Select the type of alarm you want. Choose one of the following:
•
Show reminder. Displays a pop-up notification message without
sound.
•
Play sound once. Sounds the alarm only once.
•
Play sound repeatedly. Keeps sounding the alarm until you
dismiss the alarm.
7.
If you selected to play sound, choose a sound from the drop-down list
that you want to assign as the alarm:
Operating in SnapVUE™ 61
Alarm icon
Advertisement
Table of Contents
